10-Key Typing Test
Free 10-key test for the numeric keypad.
This test needs a physical numeric keypad. On-screen keyboards on phones and tablets are not supported.
Type numbers, amounts or decimals for 30 seconds to 5 minutes, checked on Enter or per key, and see your KPH.
A typing test for the numeric keypad. Numbers appear one at a time; type each one and press Enter. By default each entry is checked when you press Enter, as in data entry work; you can also have each key checked as you type it. When the time is up you get keystrokes per hour (KPH) and per minute (KPM), your accuracy, and a keypad map showing which keys you miss and which keys slow you down.
10-Key Typing Test: Features
How this test counts KPH
KPH is the number of correct keystrokes per hour. This test counts digits, the decimal point, the minus sign and the Enter key that ends each entry. Thousands separators in the Amounts format are only there to make the number readable, so you do not type them and they are not counted. With the On Enter check, each entry is checked when you press Enter, you can fix mistakes with Backspace before that, and an entry with any error adds nothing to your KPH; accuracy is shown as the share of correct entries. With the Per key check, a wrong key does not move you forward: the test waits on the same character until you press the right key, and the wrong press lowers your accuracy, which is then correct keystrokes divided by all keystrokes. KPM is the same rate per minute, so KPH is about 60 times KPM. Runs shorter than 10 seconds are marked as rough, because a few keystrokes can swing the rate a lot. Employers and practice sites do not all count the same way, for example in whether Enter counts as a keystroke and how errors are handled, so a figure from this test is only directly comparable with another figure measured the same way.
What counts as a good 10-key speed
There is no single standard. Figures such as 8,000 to 10,000 KPH are often repeated online, usually without a source. One documented requirement is a 2019 U.S. Census Bureau posting for a data entry clerk, which asked for 5,400 keystrokes per hour or 25 words per minute with three or fewer errors, based on a five-minute typing sample. That was a general typing requirement rather than a 10-key test, but it shows that published requirements can be well below the numbers quoted elsewhere. Employers set their own thresholds and score tests in different ways, so ask how the test you are preparing for counts errors and the Enter key. To get the closest comparison here, use the On Enter check and the 5-minute time.
Home row on the keypad
Rest your index, middle and ring fingers on 4, 5 and 6. Most keyboards have a small bump on the 5 key so you can find the home row without looking. The rows above and below are reached by moving the same fingers straight up or down: 7, 8 and 9 above, 1, 2 and 3 below. Return to 4, 5 and 6 after every key. The thumb takes 0, the ring finger takes the decimal point, and the little finger covers Enter and plus. On the top row, Num Lock is the index finger, divide the middle finger, multiply the ring finger and minus the little finger. Accuracy comes first: a wrong key costs you the correction as well, so build speed only once your accuracy stays high.
Choosing a format and a check
Numbers gives you strings of a fixed length, including leading zeros, like product codes, invoice numbers or IDs. Pick 3, 4, 6 or 8 digits, or Mixed for anything from 3 to 8. Amounts shows money values with thousands separators, such as 12,500 or 980, and you type only the digits, as you would when entering values into a spreadsheet. About four in ten amounts end in zeros, which trains the 0 key. Decimals adds the decimal point and the minus sign, for example -12.75 or 0.5. The On Enter check, which is selected by default, leaves you to notice and fix your own mistakes, which is closer to real data entry work. If you are still learning where the keys are, switch to Per key: it shows the next key on the keypad map and stops you at every wrong key until you press the right one. If you are preparing for a specific test, practice the format it uses and keep the same duration each time so your results stay comparable.
When the keypad types arrows or nothing at all
If the keypad moves the cursor instead of typing numbers, Num Lock is off. Press the Num Lock key, usually at the top left of the keypad, to switch it on; many keyboards light an indicator when it is on. Some laptops without a separate keypad can turn part of the letter keys into one, for example with Fn and a Num Lock key, but the keys differ between models, so check the manual. If Num Lock is on and the keypad moves the mouse pointer instead, Mouse Keys may be on. On Windows 11 it is under Start > Settings > Accessibility > Mouse, and on a Mac under Apple menu > System Settings > Accessibility > Pointer Control. This test reads keys by their position, so it still counts digits when Num Lock is off, and it tells you that Num Lock was off.
Practicing without a numeric keypad
You can take the test with the number row above the letters, and the result shows what share of your keystrokes came from outside the keypad. The finger movements are completely different from a keypad, though, so a number-row score says little about your 10-key speed. If your work involves a lot of numeric entry, you can add an external USB or Bluetooth keypad. On-screen keyboards on phones and tablets are not supported.
10-Key Typing Test: FAQ
What is a good 10-key speed?
There is no single benchmark. Employers that test 10-key skills set their own requirements; one documented example, a 2019 U.S. Census Bureau data entry posting, asked for 5,400 keystrokes per hour with three or fewer errors on a five-minute sample. The most reliable comparison is with yourself: use the same format, check and duration each time.
What is the difference between On Enter and Per key?
On Enter, the default, checks each entry only when you press Enter: you can correct mistakes with Backspace first, and an entry with any error counts as zero. This is closer to real data entry work. Per key stops you at each wrong key until you press the right one and shows the next key on the keypad map, which helps while you learn the keypad.
Does KPH include the Enter key?
Yes. Every entry ends with Enter, and pressing it is part of the work, so it is counted like any other key. Keys pressed by mistake are not counted in KPH, and with the On Enter check an entry with an error adds nothing.
Can I use the 00 key?
Yes, if your 00 key sends 0 twice, which is how these keys usually work. Each press counts as two zeros.
Does it work on a Mac?
Yes. Any keyboard with a numeric keypad works the same way on a Mac. If the keypad moves the pointer instead of typing, turn off Mouse Keys under Pointer Control in the Accessibility settings.
Is my result saved?
No. The result disappears when you close the page or start again. Use Copy result to keep it as text.
How to Use 10-Key Typing Test
-
Choose a format, check and time
Pick Numbers, Amounts or Decimals, On Enter or Per key, and 30 seconds, 1, 3 or 5 minutes. For Numbers you can also choose the number of digits.
-
Type on the keypad
Type the number shown and press Enter. The timer starts with your first digit. With On Enter, you can fix mistakes with Backspace before you press Enter; with Per key, a wrong key does not move you forward until you press the right one.
-
Read your result
When time is up you see KPH, KPM, accuracy and entries, plus a keypad map of the keys you missed and the keys that slowed you down. Press Esc or Stop to end early, and Enter to start again.
Category Utilities